Zerto is primarily used for disaster recovery. In rare cases, it is also used for backup, but only for long-term storage.

We deployed our on-premises infrastructure in two data centers in Russia located in two cities, and multiple regions with combined infrastructure. We also had two data centers in Europe.

Zerto is extremely easy to use. When I started to pilot the product in 2016, I was able to deploy all required components in one or two hours without any help from Zerto engineers. I only used the provided documentation and user interface. In the years since my engineers have also had no issues with the implementation or configuration of the product. Zerto's ease of use is one of its best features.

To ensure good synchronization and replication of changes in a timely manner, we need to have a very good storage subsystem. In our case, we replaced our old storage subsystem with a new one that is based on full flash storage. After that, Zerto started to replicate changes at lightning speed. Many companies experience issues with Zerto if they do not have full flash storage. When full flash storage is implemented, Zerto is the best replication solution because it is highly dependent on the latency of the storage. Therefore, any kind of storage that is not based on full flashes, such as hybrid storage that combines flash and disks, is not a good foundation for Zerto implementation.

Prior to implementing Zerto, our disaster recovery tests had a 70 percent success rate. After implementing Zerto, all DR tests were 100 percent successful. This represents a significant improvement in our DR capabilities.

We used Zerto to replicate our virtual machines from our primary data center to our disaster recovery data center in another city over a single connection.

Zerto can achieve very low recovery point objectives due to its efficient use of resources and compression techniques. However, our company has different RPO requirements for different-sized companies. Since our company is small, our standard RPO is four hours. Zerto exceeded this requirement by achieving a typical RPO of about 15 seconds.

Zerto is a very easy and fast tool to use. However, it is important to note that Zerto requires some time to accept changes after migration. This means that if we do not finish testing within the required time frame, we may run into issues with storage space, as Zerto will continue to collect logs and other data. If the testing period is short and we are comfortable switching between data centers frequently, then we should have a very good experience with Zerto. Compared to VMware SRM, Zerto is much more reliable. I have never had any issues switching between production and the DR data center with Zerto, while I have had to start DR exercises from scratch multiple times with VMware SRM.

We always define and perform the required RTO values in our company. RTO is the time required to recover from a switch. It is about how long it will take IT staff to restore the environment. With Zerto, we can now do this in hours, typically one or two hours, for all switching activities. We have 70 virtual machines configured in Zerto, so it takes about one hour to switch all of them. This is four times faster than our previous solutions, such as VMware SRM or storage-based replication.

Zerto has saved us time in data recovery situations due to ransomware or other causes. It is very easy to use, so we do not need to spend extra time training engineers on how to use it. All of our engineers were able to start using Zerto immediately. Zerto is also very fast at replicating data. For example, when we set up a new replication, the initial replication was completed very quickly. Another advantage of Zerto is that it does not require additional steps to change the size of virtual disks. With our previous solution, VMware SRM, engineers had to perform additional manipulations in VMware when changing the size of virtual disks. This was a complicated process, but it is not necessary with Zerto. Overall, Zerto is a very user-friendly and efficient data protection solution. It has saved us time and money, and it has made our data recovery process much easier.

Zerto has saved us around 50 percent of our time.

The most important thing to me is Zerto's ability to deliver continuous protection for all data without any issues or incidents. Zerto is a rock-solid product in terms of protection. We migrated to Zerto from VMware SRM because we had a lot of issues with VMware SRM, including the loss of one server.

Zerto's price has room for improvement.

I have used Zerto for six years. 

I give Zerto's stability a nine out of ten.

Globally we have around 200 engineers that use Zerto.

Zerto's technical support is excellent. When we first started using Zerto, we had Russian technical support to help us with some complex tasks, such as configuring unique virtual machines. Our engineers had no communication issues with the support team. Later, when we were in a stable period, global technical support was also very helpful. I cannot recall a time when technical support was unable to help us. Overall, I give Zerto's technical support five stars.

Positive

For many years, the company globally used a variety of different solutions for data protection and disaster recovery. These included storage-based replication solutions based on IBM and EMC storage, as well as special appliances from Dell EMC. For smaller companies, VMware SRM or VMware replication without SRM was used, with manual configuration of replication. In order to simplify and unify its data protection and disaster recovery strategy, the company decided to adopt Zerto. Zerto was initially implemented in a small region, the Middle East/Asia. After a couple of successful migrations of data centers in this region and a parallel unsuccessful DR exercise in EMEA, the company selected to use Zerto globally. Following this, smaller companies in Russia started to receive a recommendation to implement Zerto instead of any existing solutions. Zerto has been a success for the company, providing a unified and simplified data protection and disaster recovery solution that has improved the company's overall resilience.

We used one internal engineer to perform the initial setup on two data centers in two days. In general, this involved installing two virtual machines with Zerto Virtual Manager on each data center, creating the corresponding network access rules, and then deploying Zerto replication agents to all virtualization hosts. The last activity was automated, so it took about one hour to deploy Zerto for all virtualization hosts. The replication took one week.

The implementation was completed in-house.

Zerto is a premium disaster recovery solution. It is not the cheapest option on the market, but it offers a number of features that make it a good value for businesses that need a comprehensive disaster recovery plan.

I give Zerto a ten out of ten. Based on my experience with different replication solutions, Zerto is the best one I have used. I am very disappointed that my current company decided to stop using it due to existing standards. Zerto is not cheap, but it is very stable, available, fast, and easy to use.

The most time-consuming part of a disaster recovery test is the testing of small and medium-sized enterprises, business users, and other stakeholders. IT-led environment restoration activities typically take up about 30 percent of the overall DR process. Zerto can reduce this time by 50 percent. Overall, this is not a significant impact, and Zerto is a very stable and reliable solution.

Zerto has not reduced the number of employees involved in data recovery situations. This is because we have a small team, and we always use engineers to perform disaster recovery activities related to storage and virtualization infrastructure. As a result, we have not had to reduce the number of staff members used for these activities.

Zerto did not replace all of our legacy backup solutions. Our legacy backup solutions were dependent on IBM Power servers, which required corresponding backup agents. Zerto is not compatible with these agents, so we use a separate backup solution for these servers. This separate solution is still in use.

We have two data centers, each with its own equipment, servers, storage, network equipment, and so on. In each data center, we deployed two separate VMware vCenter server infrastructures connected using an L2 line. There was no L3 connection between the data centers. This created a flat L2 network with two data centers and two vCenters on each data center. After that, we deployed two VM servers configured for replication. This allowed us to have a highly available and resilient infrastructure in the event of a failure at one of the data centers.

Regarding Zerto's maintenance, we configured some monitoring for related Zerto services. However, we do not have any daily routine procedures to manually check Zerto to ensure that everything is working properly. Instead, our engineers spend one hour per week reviewing monitoring items and other metrics to ensure that Zerto is operating as expected. From my perspective, Zerto is a self-operating system that requires very little manual intervention.

Zerto is very easy to pilot. I recommend that any customer pilot Zerto before making a decision on whether or not it is the right solution for them. Zerto is a self-selling product. When I piloted it in 2016, I was able to install it in hours and start using it immediately without any help. I believe that a pilot is the best way to see how easy and beneficial Zerto can be.

We use Zerto for backups and DR; we back up to a StoreOnce unit and then offsite. We have over 11 servers, including three Oracle servers, one Oracle database, and an Active Directory. 

Before Zerto, we used another solution that caused database crashes and did not offer certainty regarding disaster recovery. Zerto is more configurable and stable.

A DR site reduces downtime, especially with full VM backup and online synchronization. Zerto accomplishes this without affecting network efficiency, as synchronization occurs at specific intervals.

Zerto's ease of use is outstanding; it's easy to set up and has a clear interface and menus. The reporting, analytics, and online monitoring are also excellent.  

Compared to other solutions, the speed of recovery with Zerto is faster. Our last backup solution, Data Protector, was very slow, but Zerto is rapid even in file retrieval. 

The solution helped reduce our organization's DR testing; it's hard to say precisely how much, but Zerto does faster DR testing than other products.

Improvements in stability would be welcome; there are some software bugs that can affect RPOs. We want more of a guarantee that we won't lose any of our backups, even in the event of a disaster. 

The platform measures the right speed of storage devices and gives an alert on the VPG if there is latency, but the nature of the alert suggests the solution isn't meeting the SLA. However, this shouldn't affect the health status of the backup. It should provide an express report that we should enhance our hardware rather than express latency as a threat to the backup capability.

We've been using the solution for two years. 

The stability is acceptable, we experienced an issue once, but the backup time is speedy.

The solution's architecture supports business owners to expand their disaster recovery capabilities as their infrastructure grows. Additionally, Zerto's ability to integrate with various cloud platforms and on-premises environments further enhances its scalability, offering a flexible and robust solution for organizations with evolving needs.

Customer support is one of Zerto's best aspects; the support is excellent, and we can quickly get through to them. I rate them ten out of ten. The support staff are very kind and always solve a problem. I feel secure knowing I have access to such good support.

Positive

We previously used Micro Focus Data Protector and Veeam Backup & Replication. Zerto is easier to use and more straightforward to configure. 

Zerto replaced our legacy backup solution, Data Protector. This not only saved on the cost of the old product but also provided more stability and security to our company. We now have a new backup methodology, and it's a significant upgrade.  

I carried out the initial setup with support from Zerto, which was very straightforward.

The only requirement for maintenance is monitoring the solution and updating versions.

I have 20 years of experience in IT, so I was well-positioned to carry out the deployment myself, with the assistance of Zerto support.

We have seen an ROI with Zerto. 

The pricing is slightly above average, but the immediate and comprehensive support makes the price acceptable.

We evaluated many other options but found Zerto the best, especially for our HPE environment. It's the most stable and straightforward tool, and even those with limited experience can operate it.

I rate the solution eight out of ten. 

I strongly recommend Zerto; I've tried many other solutions, but it's the most stable.

We use the product to help protect VMs in our environment, and regarding RPOs, I carry out the test for them every six months, and it's working correctly.

I advise those evaluating the solution to use it, especially in an HPE environment, as it's fully compatible and easy to manage. There is no requirement for special drivers or configurations.

We use Zerto for our disaster recovery procedure and testing to ensure our servers and virtual machines can failover from a production environment if there's a catastrophe. We have a disaster recovery test twice a year and use Zerto to recover the environment.

We have two environments for Zerto. One is for the US, and the other is for Europe. We updated one last week to version 9.0, and the other still uses version 8.5 but I will update that today or tomorrow.

Zerto cut down the recovery time tremendously and improved our disaster recovery process. It made it easier for us to recover if needed during a disaster. Zerto definitely reduced downtime. The other software we used had a lot of manual steps. It was efficient, but our recovery time was longer. I estimate that Zerto cut our recovery time by at least 70 percent.

We had a disaster recovery four or five years ago. I can't remember what happened, but I believe something crashed in our data center, like a power outage. We did a failover of our network using Zerto from production to disaster recovery. We successfully completed the failover process in three or four hours without issue. The data was current, and the application owners could access their data and continue working while the issue was resolved. 

Zerto also brings down our costs. If we don't meet our SLAs, the clients are not happy and we get billed or fined. Every minute an application is down is costly for us. However, I don't think it has reduced our staff. We have a dedicated team for disaster recovery. While it doesn't cut down on the number of team members, It makes our jobs a lot easier.

Near-synchronous replication is an extremely powerful feature because it's like a mirror environment with almost real-time replication. Everything in my production environment is mirrored in the Zerto environment. I want the two to be as close as possible. 

If you have a disaster, we don't want your data to lag too far behind. You don't want to be an hour or two days behind. When you recover an environment in Zerto, the data is current.

I would like to see some graphical improvements in Zerto's interface. There's an option to export a list of all of our servers, but the information isn't presented the way we want. We want it in a specified sequence broken down by region, etc. We can't manipulate the data when we export it. Maybe they could change it to look more like an Excel sheet, and we can customize the graphics and data. We suggested these improvements to Zerto through their portal.

We've been using Zerto for six or seven years.

It's highly stable. We've had no issues. We haven't had an incident or any problems with Zerto being unavailable or maintenance that would cause an outage on our side. If anything is happening on Zerto's side, we're not affected and that is great.

We haven't seen any limitations so far. Zerto is constantly upgrading its products. There are upgrades every five months or so. They're constantly tweaking and making the product better.

I rate Zerto support nine out of ten. It's excellent overall. We've only had one issue in the past six or seven years. I think the person was maybe new to the team.

They prioritize calls based on severity. If the issue is affecting our environment and we can't get anything done, they'll escalate the ticket and help us immediately. If we just have general questions or a concern that isn't severe, they still respond quickly.

Positive

We previously used a site recovery manager from vCenter. It's effective, but it requires a lot of manual steps, especially when we deal with databases and so forth. Zerto is quicker, more efficient, and easier on the eyes. I'm a huge fan. 

We started using Zerto because vCenter required more steps to failover our environment. Zerto does all the steps that we would normally need to do manually, reducing our recovery time and procedure steps. Something that previously took 45 minutes takes Zerto 10 minutes.

The other solutions are still in place. We use vCenter and NetBackup for our legacy systems.

Zerto is user-friendly. When I set this up six or seven years ago, I knew nothing about Zerto. It was relatively straightforward to go from the vCenter SRM to the Zerto environment. It's intuitive, so I can log onto Zerto and figure it out without having to take a class or official training. I can log on and navigate through the screens. If I get stuck, Zerto support is always available.

There were two of us who set it up. I'm in the US, and the other guy is in the Philippines. He initiated it, and I finished it. We completed it in one day, but I don't remember how many hours it took. We did a quick check the following day to ensure everything was in line.

I contacted Zerto recently when I upgraded one of my environments to version 9. I had some general questions because a few of our VMs were not syncing. I was getting an error message because the recovery didn't progress, so I had to reach out to Zerto support. We actually figured that out on our own, but they pointed us in the right direction.

We tested one product for two or three months, but I can't think of the name of it. Zerto was easier for us to dive into and pick it up quickly. The leadership of the disaster recovery team made the final decision along with management. I don't know if cost played a factor, but Zerto was more efficient and easier to use. It was exactly what we needed.

I rate Zerto ten out of ten.